Go to the contents area
Go to the contents area

HP Pump System

HP Pump System | HP Wash Down Unit

Firscomp provides a wide range of high pressure washing units for the use in hazardous and safe areas in both offshore and onshore. We design complete packages for the specific requirements compliant to international codes and standards. For meeting the required water temperature, we can offer both electric heaters and steam heaters as per the client’s requisition. Typical applications are removal of mud, dirt, grease, and oil, parts washing, sidewalks and maintenance area washing. They are suitable for locations with the harshest of environments including oil refineries, petrochemical plants, mills and mines.

Applications

  • Operating pressure upto 500 barg at flow rate as per requirements
  • Meeting the required atmosphere condition with hot, warm and cold water
  • Compliance to EN,PED, ATEX, NORSOK, API, IECEx
  • Acoustic Enclosure or containerized unit
  • Service water tank
  • Local Control Panel

Reference Applications / Specifications

Explosion-proof Cold Wash Down Unit (ATEX-Zone 2)
  • Application : Mud Removal at Offshore Drilling Platform
  • Main Motor Power : 7.5 kW / 690 V / 50 Hz / 3 Ph
  • Operating Pressure : 207 barg
  • Flow Rate: 15.2 LPM
  • Operating condition : Cold wash down
  • Construction : Plunger Pump with 8 liters water tank and LCP on common skid
  • Electric, Instrument & Control feature :
    • Manual Start Stop,
      Local Pressure Gauge
    • Floating valve for water tank
    • Motor Starter Unit – Ex d IIB T4
    • Electric Motor – Ex de IIC T3, IP56
Warm wash down unit
  • Application : Mud Removal at Offshore Drilling Rig
  • Applied Code : NORSOK and project specification
  • Main Motor Power : 30 kW / 690V / 60Hz / 3Ph, IP54
  • Electric Heater : 35 kW / 690V / 60 Hz /
    3 Ph including heater controller thyristor
  • Operating Pressure : 200 barg
  • Flow Rate: 50 LPM
  • Operating condition : Warm wash down (60 °C)
  • Construction :
    • * 1500 Liters Water Tank skid with LCP
    • * Pump skid with motor
    • * Local Control Panel with Motor Starter
    • * Enclosure of IP44
    • * Local start/stop
Warm wash down unit
  • Application : Mud Removal at Offshore Drilling Rig
  • Applied Code : NORSOK (S-002 & S-005) and project specification
  • Main Motor Power : 30 kW / 690 V / 60Hz / 3Ph, IP54
  • Electric Heater : 35 kW / 690 V / 60 Hz /
    3 Ph including heater controller thyristor
  • Operating Pressure : 200 barg
  • Flow Rate: 50 LPM
  • Operating condition : Warm wash down (60 °C)
  • Construction :
    • * Complete package on common skid
    • * 1500 Liters water tank in stainless steel 316L with floating valve
    • * HP Plunger Pump with motor
    • * Heater and piping insulation
    • * Local Control Panel with Motor Starter
    • * Enclosure of IP44
    • * Local start/stop
top bottom